Looking for:
2004 jeep liberty owners manual download |
Monday, February 6, 2023
2004 jeep liberty owners manual download. JEEP LIBERTY 2004 KJ / 1.G Owners Manual
JEEP LIBERTY KJ / 1.G Owners Manual ( Pages)
For nose or throat irritation, move to fresh air. Continued You will want to have the air bags ready to Do not attempt to modify any part of your air bag inflate for your protection in a collision.
The system. The air bags may How far if at all the driver was depressing the not be ready to inflate for your protection. Safety experts recommend that children ride Rearward-facing child seats must never be used in rearward-facing in the vehicle until they are at least the front seat of a vehicle with the front passenger air one year old and weigh at least 20 lbs 9 kg.
It could come loose in a has a label certifying that it meets all applicable Safety collision. Child restraints having tether straps and hooks for connection to the top tether anchorages have been avail- When your child restraint is not in use, secure it in able for some time.
Forward- rear seating position located on the back of the seat. Slide the latch 2. This should be drivetrain transmission and axle in your vehicle. In a collision, people Exhaust gases can injure or kill.
They contain carbon riding in these areas are more likely to be seri- monoxide CO , which is colorless and odorless. Continued Check operation by selecting the defrost mode and place Always make sure that floor mats are properly the blower control on high speed.
You should be able to attached to the floor mat fasteners. Continued and cracks. Inspect sidewalls for cuts, cracks and bulges. Always make sure that objects cannot fall into the Check the wheel nuts for tightness.
Check the tires driver footwell while the vehicle is moving. Adjust the mirror to center on the view through the rear window.
Headlight glare can be reduced by moving the small control under the mirror to the night position toward the rear of vehicle. You can turn the feature on or off by pressing the button at the base of the mirror. A light to the left of the button will illuminate to indicate when the dimming feature is activated. This or R right and then press one of the four arrow buttons feature is activated whenever you turn on the rear to move the mirror in the direction the arrow is pointing.
Unclip the visor from the center clip. Pull the sun visor toward the inside rearview mirror to extend it. Page Only one linked or paired mobile phone can be used with the system at a time.
The system is available in www. Press the button to begin. The number dialed may Towing Assistance not be applicable with the available mobile service and If you need towing assistance: area. Paging works properly except for pagers of on your mobile phone keypad, you can press the certain companies, which time out a little too soon to button and say the sequence you wish to enter, followed Even though the system is designed for users speaking in North American English, French, and Spanish ac- Even though international dialing for most number cents, the system may not always work for some.
Where are you? To send 4. I need more direction. L O L Press the button. Can this wait? Bluetooth Communication Link Mobile phones have been found to lose connection to the When this happens, the connection Operation is subject to the the Voice Interface System to recognize user voice com- following conditions: mands may be negatively affected by rapid speaking or a Say a command e.
Use this switch to move the seat up Push the seat switch forward or rearward, the seat will or down, forward or rearward or to tilt the seat. NOTE: When a heat setting is selected, heat will be felt Amber indicator lights in each switch indicate the level of within two to five minutes. Release the bar once you have passenger seats can be adjusted forward or rearward by reached the desired position. To recline the seatback, lean forward slightly and lift the lever. Then lean back to the position desired and release Do not ride with the seatback reclined so that the the lever.
Turn the flat for extended cargo space. To lower the head restraint, press the adjust- forward and backward. To tilt the head restraint closer to ment button, located at the base of the head restraint, and the back of your head, pull forward on the bottom of the push downward on the head restraint. Continued Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo.
To avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is se- cured, as loose cargo could contact the Active Head Restraint during sudden stops. This will allow the rear seat to fold down routing. Pull the release strap toward the front of the vehicle. To Raise The Rear Seat NOTE: If interference from the cargo area prevents the seatback from fully locking, you will have difficulty returning the seat to its proper position.
The rear seatback also reclines for additional passenger comfort. Pull the release strap while sitting in the rear Do not ride with the seatback reclined so that the seat to recline the seatback. Turn the ignition ON. Adjust all memory profile settings to desired prefer- ences i. Outside of the vehicle, locate the safety latch lever Two latches must be released to open the hood.
Place the upper end of the prop rod in the hole on the underside of the hood. Be sure the hood is fully latched before driving your vehicle. Turn the end of the lever to The multifunction lever on the left side of the steering the second detent for headlight operation. To turn the system on, turn the end of the multifunction lever to the AUTO position third detent.
Then, When this feature is active, the headlights will turn on turn off the headlights within 45 seconds. If this occurs, wait 30 seconds before activating the flash-to-pass function again. Instrument Panel Dimmer Rotate the center portion of the lever to the extreme bottom position to fully dim the instrument panel lights Continued Always remove any buildup of snow that prevents the windshield wiper blades from returning to the off position.
If the windshield wiper control is turned off and the blades cannot return to the off position, damage to the wiper motor may occur. It will not operate under the wiper speed is in the low or high position.
EVIC — Do not adjust the steering column while driving. Adjusting the steering column while driving or driv- ing with the steering column unlocked, could cause the driver to lose control of the vehicle. Be sure the steering column is locked before driving your ve- hicle.
If this occurs, the Electronic Speed Control right side of the steering wheel. If the button is continually speed up and down hills. A slight speed change on held in the SET - position, the set speed will continue to moderate hills is normal.
As the vehicle moves closer to the object the EVIC display will show fewer arcs and the sound tone will change from slow, to fast, to continuous. The following chart shows the warning alert operation when the system is detecting an obstacle Do not use rough or hard cloths. Continued systems. System, it is strongly recommended that the ball The HomeLink buttons that are located in the headliner mount and hitch ball assembly is disconnected or sun visor designate the three different HomeLink Continued rity Alarm is active.
Vehicle exhaust contains carbon monoxide, a dan- gerous gas. Exhaust gas can Your motorized door or gate will open and close cause serious injury or death. Some gate operators and garage door openers may require you to replace Step 3 with procedures noted in 1. Return to the vehicle and press the programmed Similar to this Canadian law, some U. Using HomeLink Security To operate, press and release the programmed It is advised to erase all channels before you sell or turn HomeLink button.
This device must accept any interference that may be to complete the training for a Rolling Code. The power sunroof switch is located between the sun visors on the overhead console.
Never leave unattended children in a vehicle with the key in the ignition switch. Occupants, particu- larly unattended children, can become entrapped by the power sunroof while operating the power sunroof switch. The sunroof will close fully and stop automati- Press the switch rearward and release it within one-half cally. During Express second and the sunroof will open automatically from any Close operation, any movement of the switch will stop position.
This is a normal occurrence and can be minimized. If the buffeting occurs with the rear windows open, then open the front and rear windows together to minimize the buffeting. Do not exceed the maximum power of Watts 13 Amps at 12 Volts. If the Watt 13 Amp power rating is exceeded the fuse protecting the system will need to be replaced.
Power outlets are designed for accessory plugs only. Continued Only devices designed for use in this type of Accessories that draw higher power i. Rear Cupholders Front Cupholders Center Console Removable Storage Tray This allows for extended cargo space and still maintains some rear seating room.
Turn over the cover and reinstall it. NOTE: You can install the cover with either side facing upward. With the cover seated in the floor, pull upward on loops and twist them one-quarter turn so that they are no longer parallel to the slots in the cover. Cargo Tie-Down Loops Cargo tie-down loops are located on the trim panels. Cargo Tie-Down Hooks Cargo tie-downs are not safe anchors for a child The weight and position of cargo and passengers can seat tether strap.
In a sudden stop or accident, a change the vehicle center of gravity and vehicle tie-down could pull loose and allow the child seat handling. Continued in use. You can also remove the cover from the vehicle to Do not pile luggage or cargo higher than the top of make more room in the cargo area. As the cover nears the liftgate opening, guide the rear attachment posts on both ends of the cover into the notches in the trim panels. Then, lower the cover to position the posts into the bottom of the notches and release the handle.
In a collision, a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compart- ment.
The washer pump will 10 minutes. For an additional five minutes of operation, continue to operate as long as the switch is held press the button a second time. Continued placed on the roof rack. Check the straps frequently to be Do not use scrapers, sharp instruments, or abra- sure that the load remains securely attached. To avoid damage to the roof rack and vehicle, do Cargo must be securely tied down before driving not exceed the maximum roof rack load capacity.
Improperly secured loads can fly off the Always distribute heavy loads as evenly as pos- vehicle, particularly at high speeds, resulting in per- sible and secure the load appropriately. If your vehicle has tires of a 1.
If a an onboard diagnostic system, called OBD, that problem is detected, the light will come on monitors engine and automatic transmission con This indicator shows that the high beam head- lights are on. Pull the multifunction control lever Prolonged driving with the MIL on could cause on the left side of the steering column toward you to damage to the engine control system.
See an autho- ABS. Before the pointer reaches the red area, ease up This light will illuminate when selecting on the accelerator to prevent engine damage. Driving with a hot engine cooling system could A hot engine cooling system is dangerous. You or damage your vehicle. Indicator Button Continuous driving with the Transmission Tempera- Changing the Display ture Warning Light illuminated will eventually cause Press this button to change the display from odometer to severe transmission damage or transmission failure.
Fully depress the accelerator pedal slowly three Only times within 10 seconds. Your vehicle is equipped with an engine oil change 3. Turn the ignition switch to the LOCK position. After the bulb check or when driving, if the driver seat In this case, the light will remain on until the condition belt remains unbuckled, the Seat Belt Warning Light will has been corrected.
If the light does not illuminate, have the light inspected by an authorized dealer. Refer scheduled oil change interval. If necessary, repeat this procedure. Engine temperature can also affect the the EVIC turns off. The compass will now function displayed temperature; therefore, temperature readings normally. This is where the compass sensor is located. Language 3. Press the right switch position to operate the radio. Press and hold the TIME button until the hours blink.
The radio will return a Radio Text control knob to the right or left to increase or decrease the message broadcast from an FM station FM mode only. Use the remote control to scroll Weather Weather up and down the menu if equipped. If changes are made to these settings after repeating the above procedure with this exception: Press a disc is loaded, changes will not be effective.
If the medium on the disc. No function. Press any button on Satellite reception may be interrupted due to one of the the radio to exit this screen. Press the right switch to seek causes the tuner to search for the next channel in the up and the left switch to seek down. If a button is not channel with the same selected Music Type name.
Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection. This feature plays the selections on the Level 1 and Level 2 and includes the Joliet extension.
MP3 Pro files are not To increase the speed of disc loading, it is recommended supported. The time of day will display for five seconds when ignition is OFF. SCROLL control knob to the right or left to adjust the sound level from the right or left side speakers. If the CD is not removed, the radio will reinsert the CD but will not play it.
Multisession discs may contain combinations of normal Maximum number of folders. The radio display of file CD audio tracks and computer files including MP3 files. Sirius will supply a wel- Press this button to change the display to time of day. The come kit that contains general information, including time of day will display for five seconds when the how to setup your on-line listening account. The Sirius ID number following reasons: display will time out in two minutes.
Reach behind the wheel to access the switches. Pressing the bottom of the switch once will go to the beginning of the current track, or to the The left-hand control is a rocker-type switch with a beginning of the previous track if it is within one second A light will illuminate Extended use of this mode is not recommended.
If Equipped 1. In manual The temperature setting can be adjusted at anytime mode there are six blower speeds that without affecting automatic operation. When the air conditioning is In cold weather, use of the Recirculation mode may turned on, cool dehumidified air will lead to excessive window fogging.
However, must be protected with a high-quality antifreeze coolant under certain conditions, while in Automatic Mode, to provide proper corrosion protection and to protect the system is blowing air out the defrost vents. The windshield, is free of obstructions such as leaves. Continued To ensure reliable starting at these temperatures, use of Do not attempt to push or tow your vehicle to get an externally powered electric engine block heater avail- it started.
If your foot is not firmly on the brake pedal, ing precautions are not observed: the vehicle could accelerate quickly forward or in Shift into PARK only after the vehicle has come to Use this lever in the PARK position. Transmission Limp Home Mode Transmission function is monitored for abnormal condi- tions.
If a condition is detected that could result in transmission damage, the Transmission Limp Home Mode will be engaged. In this mode, the transmission will remain in second gear in any forward driving range. Continued Since four-wheel drive provides improved trac- You or others could be injured if you leave the tion, there is a tendency to exceed safe turning and vehicle unattended with the transfer case in the stopping speeds.
If this light re- and rear driveshaft from the powertrain. To be used for mains on after engine start up, or it illuminates during flat towing behind another vehicle. Bring the vehicle to a complete stop. If the ignition switch is not in the ON position, 2. If the vehicle is stopped, 3. While still rolling, move the transfer case switch to the the ignition switch must be in the ON position with the desired position. This shift cannot be 4.
To retry conventional two-wheel drive vehicles any more than a shift, move the transfer case switch back to the original low-slung sports cars are designed to perform satisfacto- position, make certain all shift requirements have been Let the vehicle go slowly down If the engine stalls or you lose headway or cannot the hill with all four wheels turning against engine make it to the top of a steep hill or grade, never compression drag.
Check tires, body structure, steering, suspension, and exhaust system for damage. Abrasive material in any part of the brakes may cause excessive wear or unpredictable braking.
You might Inspect the radiator for mud and debris and clean as not have full braking power when you need it to required. Under these condi- tions, you will observe a substantial increase in steering Continued operation with reduced power steering effort, especially at very low vehicle speeds and during assist could pose a safety risk to yourself and others.
Checking the power steering fluid level at a defined service interval is not required. Continued parking brake should always be applied whenever the Be sure the parking brake is fully disengaged driver is not in the vehicle. If you have your foot lightly on the brake driver in maintaining vehicle control under adverse while this test is occurring, you may feel slight pedal braking conditions. The ABS cannot prevent the natural laws of phys- The ABS is subject to possible detrimental effects of ics from acting on the vehicle, nor can it increase electronic interference caused by improperly in- braking or steering efficiency beyond that af- stalled aftermarket radios or telephones.
Be especially careful while brake control system commonly referred to as ESC. The The Brake Assist System BAS cannot prevent the system detects an emergency braking situation by sens- natural laws of physics from acting on the vehicle, ing the rate and amount of brake application and then nor can it increase the traction afforded by prevailing The system will release brake pressure in proportion to amount of There may be situations where the Hill Start Assist throttle applied.
This feature can be turned on or turned off. To change the current setting, proceed as follows: If you use a trailer brake controller with your trailer, the trailer brakes may be activated and For vehicles equipped with the Electronic Vehicle Infor- deactivated with the brake switch. Apply the parking brake. Start the engine. HDC maintains vehicle speed while descending hills in 5.
Rotate the steering wheel one-half turn to the left. When either the brake or the bank below the climate control. Tire Markings design standards. European-Metric tire sizing is based on European design standards. If the TIN is not found on however, the date code may only be on one side. Cold Tire Pressure Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least 3 hours, or driven less than 1 mile 1.
Subtract the combined weight of the driver and pas- 6. Consult this manual to determine how this reduces the available 4. Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and Improperly inflated tires are dangerous and can increase your stopping distance.
Use tires of the cause collisions. Never Under-inflation increases tire flexing and can re- overload them. Continued sluggish response or over responsiveness in the steering. Unequal tire pressures from one side of the ve- Unequal tire pressures can cause erratic and unpredict- hicle to the other can cause the vehicle to drift to able steering response.
Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the winter. Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision.
Seat belts are designed to go around the large bones of your body. These are the strongest parts of your body and can take the forces of a collision the best. A belt that is buckled into the wrong buckle will not protect you properly.
The lap portion could ride too high on your body, possibly causing internal injuries. Always buckle your belt into the buckle nearest you. A belt that is too loose will not protect you as well. A lap belt worn too high can increase the risk of injury in a collision. The belt will automatically retract to its stowed position. If necessary, slide the latch plate down the webbing to allow it to retract fully.
A frayed or torn belt could rip apart in a collision and leave you with no protection. Position the shoulder belt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the safety belt properly could reduce the effectiveness of the seat belt and increase the risk of injury in a collision. Children 12 years old and under should be properly restrained in the rear seat whenever possible.
In addition, all seat belts should be checked for proper function. Seat Belts and Pregnant Women We recommend that pregnant women use the seat belts throughout their pregnancy. Page 47 This vehicle may also be equipped with window bags to protect the driver, front, and rear passengers sitting next to a window. If the vehicle is equipped with window bags, they are located above the side windows. NOTE: Airbag covers may not be obvious in the interior trim; Window bags also work with seat belts to improve occupant protection.
Page 49 You should read the instructions provided with your child restraint to make sure that you are using it properly. All occupants should use their lap and shoulder belts properly. The driver and front passenger seats should be moved back as far as practical to allow the airbag room to inflate.
Page 51 modify the rate of inflation based on the occupant size provided by the Occupant Classification Module. The ORC will not detect roll over, or rear impacts.
Furthermore, the occupant size may appear to increase or decrease due to objects hanging on the seat, other passengers pushing on the seat, or objects lodged underneath the seat. Page 53 For almost all sizes of properly seated adults, the passen- ger frontal airbag will be enabled in the event of a collision. For small teenagers and some small adults, depending on size, the airbag may or may not be enabled in the event of a collision.
The bags fully inflate in about 50—70 milliseconds. This is about half of the time it takes to blink your eyes. The bags then quickly deflate while helping to restrain the driver and front passenger. Page 55 pressure increase due to applied lap belt tension does not cause a small occupant to be classified as a larger occupant.
The pressure sensor sends a signal to the OCM. The abrasions are similar to friction rope burns or those you might get sliding along a carpet or gymnasium floor. Page 57 Also, the fuel system will shut off immediately upon airbag deployment gasoline models only. The ignition switch will need to be cycled i. Do not mount or locate any aftermarket equipment on or behind the knee bolsters.
In a collision, an unrestrained child, even a tiny baby, can become a missile inside the vehicle. The force required to hold even an infant on your lap can become so great that you could not hold the child, no matter how strong you are. An airbag deployment could cause severe injury or death to infants in this position.
The manufacturer recommends that you try a child restraint in the vehicle seats where you will use it before you buy it. Do not leave it loose in the vehicle. In a sudden stop or collision, it could strike the occupants or seat backs and cause serious personal injury.
Not all child restraint systems will be installed as described here. Again, carefully follow the installation instructions that were provided with the child restraint system.
Many, but not all restraint systems will be equipped with separate straps on each side, with each having a hook or connector for attachment to the lower anchorage and a means of adjusting the tension in the strap. Improper installation of a child restraint to the LATCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed.
Disconnect the latch plate from the buckle, turn the buckle around, and insert the latch plate into the buckle again.
An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. Children Too Large for Booster Seats Children who are large enough to wear the shoulder belt comfortably, and whose legs are long enough to bend over the front of the seat when their back is against the Drive moderately during the first miles km. They contain carbon monoxide, a colorless and odorless gas which can kill.
Never run the engine in a closed area, such as a garage, and never sit in a parked vehicle with the engine running for a extended period.
If the vehicle is stopped in an open area with engine running for more than a short period, adjust the ventilation system to force fresh, outside air into the vehicle. You should feel the air directed against the windshield. Page 73 Electronic Speed Control A two-point pivot system allows for horizontal and vertical adjustment of the mirror. The mirror should be adjusted while set in the day position toward windshield.
You can turn the feature on or off by pressing the button at the base of the mirror. A light in the button will indicate when the dimming feature is activated. Vehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other objects.
Use your inside mirror when judging the size or distance of a vehicle seen in the right side mirror. This feature is activated whenever you turn on the rear window defrost. Page 81 pin number. You will not need to remember this pin number after the initial registration process. Page 83 Phonebook edit can be used to add another phone number to a name entry that already exists in the phonebook. The first call will be on hold while the second call is in progress.
This method can also be used in instances where you are pressing a number on your keypad to navigate through a menu structure or to enter a number for a pager. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust any seat only while the vehicle is parked.
Adjustable head restraints should be adjusted so that the upper edge is as high as practical. The head restraints have a locking button that must be pushed inward to lower the head restraint. Do not ride with the seatback reclined so that the seat belt is no longer resting against your chest.
In a collision you could slide under the seat belt and be seriously or even fatally injured. Use the recliner only when the vehicle is parked. Pull up on the lever to recline the seat. In a collision, people riding in these areas are more likely to be seriously injured or killed. When the seatback is folded completely forward, the head restraints should be flush against the seat cushion. Pressing this switch to its desired setting HI or LO will activate the respective heating element for the heated seat.
Once the heated seat switch is activated, depressing it a second time will de-activate it. To prevent possible damage, do not slam the hood to close it. Lower the hood until it is open approximately 12 inches 30 cm and then push hood closed.
Page 99 The overhead lights will automatically turn off in about 8 minutes if a door is left open or the dimmer control is left in the dome light position. Turn the ignition switch ON to restore the overhead light operation. Each light can be turned on by pressing the recessed area of the lens. To turn these lights off, press the recessed area of the lens a second time.
Turn to the second detent for headlight operation. To change the brightness of the instrument panel lights, rotate the center portion of the multi-function control lever up or down. Remove lamp covers by pressing the thumb tab up- wards, and pulling the cover off. With the ignition in the ON position, press the button to turn on the light bar located on the instrument panel to the left of the steering column. Press the button again to turn off the light bar. Page Windshield Washers Windshield Washers To use the washer, pull the lever toward you and hold while spray is desired.
If the lever is pulled while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then resume the intermit- tent interval previously selected. After this, the display will continue to sequence. Move the control lever to any of the first five wiper switch positions by turning the end cap of the control lever. Tilting the steering column while the vehicle is moving is dangerous.
Without a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Release the accelerator and the vehicle will operate at the selected speed. Pressing the STEP button will select the available choices. NOTE: Temperature accuracy can be effected from heat soak. Electronic Vehicle Information Center The electronic vehicle information center EVIC , when the appropriate conditions exist, displays the following messages and symbols.
Sensors, mounted to each wheel as part of the valve stem transmit tire pressure readings to a receiver located in the over- head console. Page General Information 4. In addition to monitoring the vehicle tires, the TPM system monitors faults within the system.
Be sure to inspect your tires for proper inflation pressure. After you determine that your tires are properly inflated, see your authorized dealer for service to diagnose the problem with the TPM system. The overhead console and instrument panel displays will be in the selected units. Auto Door Locks? NO is displayed. Page NOTE: The tire pressure sensors must be retrained after rotating the tires or replacing one or more sensors. If a wheel rotation is not followed by the retrain procedure, the system will not properly inform you of the correct vehicle location for a low or high pressure tire.
The following describes how to use this feature: 1. Return magnet to storage location. A single chime will sound to indicate that a reset has occurred. Miles To Empty Shows the estimated distance that can be traveled before the fuel gauge shows E Empty. Page After completing three degree turns in an area free from large metal or metallic objects, the CAL symbol will turn off and the compass will function normally.
The last variance zone number will be displayed. It is also suggested that upon the sale of the vehicle, the programmed HomeLink buttons be erased for security purposes. Your motorized door or gate will open and close while you are programming HomeLink. Do not program HomeLink if people or pets are in the path of the door or gate. A moving door or gate can cause serious injury or death to people and pets or damage to objects. Press and hold the just-trained HomeLink button.
If your device activates when the HomeLink button is depressed and released, programming is complete. Activation will now occur for the trained device i. The sunroof can be stopped at any position between closed and full vent. To close the sunroof from the vent position, press and hold the switch forward.
Again, momentarily pressing the switch rearward will activate the Express Open Feature. To close the sunroof, hold the switch in the forward position. Pull lightly on the top of the plastic cover to open the outlet.
All accessories connected to this outlet should be re- moved or turned off when the vehicle is not in use. It heats when pushed in and pops out automatically when ready for use. To preserve the heating element, do not hold the lighter element in the heating position. If all doors are closed and only the swing gate is open, pushing on the cargo light lens surface will turn off all interior lights.
In an accident a cargo cover loose in the vehicle could cause injury. It could fly around in a sudden stop and strike someone in the vehicle. Do not store the cargo cover on the cargo floor or in the passenger compartment.
In a sudden stop or colli- sion a hook could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. Items may be placed on the flat surface or stored in the three storage compartments. Page 2. Place the rear corners of the cargo organizer into the supports located on the rear trim panel. Press down on the back of the cargo organizer to lock it into place. Do not load objects over 30 lbs Pull up on the center opening of the cargo organizer.
Lift up on the storage compartment dividers and lock into place. Cargo Organizer Removal Loosen screw, then lift lever from each mount located on the floor of the rear cargo area, and remove the cargo organizer from the vehicle. Always distribute heavy loads as evenly as possible and secure the load appropriately. Page Satellite Radio — If Equipped Tachometer Indicates the permissible engine revolutions-per-minute for each gear range.
Before reaching the red area, ease up on the accelerator to prevent engine damage. Turn Signal Indicator Light The arrows will flash in unison with the exterior turn signals, when using the multi-function control lever. Each tire, including the spare, should be checked monthly when cold and set to the recommended inflation pressure as specified on the vehicle placard.
Page light will come on when the ignition switch is turned to the ON position and may stay on for as long as three seconds. If the light comes back on immediately or comes on during driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required, however, the conventional brake system will continue to operate normally provided that the BRAKE It should not be allowed to exceed the upper limits of the normal operating range.
If the pointer rises to the red zone five chimes will occur , pull over and stop the vehicle. Do not turn the engine off. Page Oil Pressure Warning Light Shows low engine oil pressure. The light will come on and remain on when the ignition switch is turned from the OFF to the ON position, and the light will turn off after the engine is started.
A significant decrease in braking per- formance or vehicle stability during braking may occur. It will take you longer to stop the vehicle or will make your vehicle harder to control. Page the system is arming. After the alarm successfully arms, the light will flash at a slower rate to indicate the alarm is set.
Fuel Gage When the ignition key is in the ON position, the pointer will show the level of fuel remaining in the fuel tank.
A small arrow indicates the side of the vehicle where the filler cap gas cap is located. Two Types of Signals There are two basic types of radio signals AM or Amplitude Modulation, in which the transmitted sound causes the amplitude, or height, of the radio waves to vary Page Seek For your convenience, the volume can be turned down, but not up, when the audio system is off and the ignition is ON.
Press the top of the button to seek up and the bottom to seek down. Balance The balance control adjusts the left-to-right speaker bal- ance. Press the BAL button in and it will pop out. Adjust the balance and push the button back in. Page You can turn the tape player ON by inserting a cassette or activating the MODE button with a cassette in the radio , but only when the ignition and radio are on. Each time a cassette is inserted the tape player will begin playing on the side of the cassette that is facing up in the player.
Page Random can be cancelled by pressing the button a second time or by ejecting the CD from the changer. Skipping will not damage the disc or the player, and play will resume automatically. Turn the volume control clockwise to increase the volume. NOTE: Power to operate the radio is supplied through the ignition switch.
The frequency will be displayed and continu- ously updated while the button is pressed. Balance The Balance control adjusts the left-to-right speaker bal- ance. This allows a total of 10 AM and 10 FM stations to be locked into push-button memory.
The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset button is used a corresponding button number will be displayed. If the power is ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number and index time in minutes and seconds.
A CD or tape may remain in the player while in the Satellite mode. Random can be cancelled by pressing the button a second time or by ejecting the CD from the changer. Turn the volume control to the right to increase the volume.
If no station is found with the selected PTY program type, the radio will return to the last preset station. Page Fade The Fade control provides for balance between the front and rear speakers. Press the FADE button in and it will pop out. Press any other button to exit from the clock setting mode. Page Seek Press the SEEK button up for the next selection on the tape and down to return to the beginning of the current selection. Press the SEEK button up or down to move the track number to skip forward or backward 1 to 7 selections.
Press the SEEK button once to move 1 selection, twice to move 2 selections, etc. When power is restored to the tape player, the pinch roller will automatically reengage and the tape will resume play. Press the bottom of the button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
The following will be displayed in this order: After three seconds, the current channel name and number will be displayed for five seconds. NOTE: Power to operate the radio is controlled by the ignition switch. Fade The Fade control provides for balance between the front and rear speakers. Operation is subject to the following conditions: 1. This device may not cause harmful interference, 2. This device must accept any interference received, including interference that may cause undesired opera- tion.
Page show the disc number, the track number, and index time in minutes and seconds. Play will begin at the start of track 1. The RW Reverse button works in a similar manner.
A CD or tape may remain in the radio while in the Satellite radio mode. The radio will play 7 seconds of the selected channel before moving to the next channel of the selected program type. Press the SCAN button a second time to stop the search. The left hand control is a rocker type switch with a push-button in the center.
The function of the left hand control is different depending on which mode you are in. The following describes the left hand control operation in each mode. The button in the center of the left hand switch has no function in this mode. CD Player — The head and capstan shaft in the cassette player can pick up dirt or tape deposits each time a cassette is played. The result of deposits on the capstan shaft may cause the tape to wrap around and become lodged in the tape transport.
This condition may be lessened or eliminated by relocating the cellular phone antenna. This condition is not harmful to the radio. Page Temperature Control The degree of comfort can be selected by rotating the temperature control knob on the right. The coldest tem- perature setting is fully counterclockwise and the warm- est setting fully clockwise. The knob can be positioned at any detent. Mode Selection The mode selector the center rotary knob can be set in any of the following positions Defrost Air flows through the outlets at the base of the windshield and through the side window demister outlets.
Slight airflow from the defrost outlet, located at the base of the windshield, may be noticed. Floor Air flows through the floor outlets located under the instrument panel and through the outlets lo- cated in the rear of the center console.
To rapidly clear the fog off all the windows, select the defrost mode, turn the temperature control knob fully clockwise, and position the blower control to its highest speed. When the vehicle is restarted, the wiper will resume function at whichever position the switch is set If the swing gate flip-up window is open or the swing gate is open, connection to the rear window wiper is interrupted preventing activation of the rear wiper blade.
Page The defroster will automatically turn off after about ten minutes. For about five more minutes of operation, push the button again. To prevent excessive battery drain, use the defroster only when the engine is operating. The push button also activates the heated exterior mirrors, if so equipped. Do not leave children or animals inside parked vehicles in hot weather. Interior heat build up may cause serious injury or death. Never pour fuel or other flammable liquids into the throttle body air inlet opening in an attempt to start the vehicle.
This could result in a flash fire causing serious personal injury. If this occurs, continue cranking with the accel- erator pedal pushed all the way to the floor.
Release the accelerator pedal and the key once the engine is running smoothly. Remember to disconnect the cord before driving. Damage to the volt AC electrical cord could cause electrocution.
Subscribe to:
Post Comments (Atom)
2004 jeep liberty owners manual download. JEEP LIBERTY 2004 KJ / 1.G Owners Manual
Looking for: 2004 jeep liberty owners manual download Click here to download MANUAL 2004 jeep liberty owners manual download -...
-
Looking for: 2004 jeep liberty owners manual download Click here to download MANUAL 2004 jeep liberty owners manual download -...
-
“It is in their interest to impose restrictions on women because they can't do it on males.”
-
Looking for: 2007 nissan maxima owners manual download Click here to download MANUAL 2007 nissan maxima owners manual download ...
No comments:
Post a Comment